Research & Development Details
G4 “Super Shoe” Bottom
Hyde Drift Boats G4 “super shoe” is the strongest bottom protection available for drift boats. See our videos below showing a G4 bottom being put to the test!
Hyde Drift Boats Pro Models are built on a raised aluminum floor and designed to allowed boat accessories to be changed in and out with ease. Please see the video below for an illustration.
Storage boxes can be added to make your trip more organized, or you can add a pedestal seat to give yourself plenty of standing room. The options are endless! Call a representative at Hyde Drift Boats for more details about this revolutionary design (800) 444-HYDE(4933).
Turn on a water faucet fully and watch as the water as it speeds up. The water is disturbed by air and surface texture and becomes less smooth rippled with eddies, swirling, and random motions. At that point the water is in a turbulent flow.
Turbulant Flow That is not to say that turbulence is all bad and should always be eliminated. Take for example the dimples on a golf ball, while traveling at high speeds and rotating there is more pressure on the front of the ball than on the rear. The dimples create a turbulent boundary layer that brings the high speed air stream around the ball closer to the surface. This in turn increases the pressure behind the ball propelling it forward further.
So why not put dimples on boat hulls, airplanes and anything else that has performance reduction because of drag? Dimples wouldn’t work on boat hulls because they are flat, slow, and don’t rotate. Dimples on a boat hull could create more drag.
We won’t get into airplanes, and other things as boat hulls are our main focus but the same principles apply. It is the shape, speed, and rotation of the ball (in addition to the dimples) that allows turbulence to work on golf balls.
Turn on a water faucet slowly and watch as the water leaves the tap. As it first leaves the tap it is smooth and undisturbed. The flow at that point is laminar and drag is minimal. Laminar flow is very fragile and can change quickly.
We use sharp angled chines on our boats which allow you to control the boat much like sharp edges on a ski would. Sharp chines on your drift boat are like having low profile Z rated tires on your car. They are a must to control your craft well.